Nitrogen Wave Soldering System

Nitrogen Wave Soldering System

Wave soldering Machines HW-450 Feature: 1. Closed Loop with inverter Control System to keep the stability and accuracy of speed managed. Have a pair of the Assistant Device to hole the PCB smoothly entry by soft-press. 2. Modularization High efficiency pre-heater is convenience for maintenance,...

Product Details

Wave soldering Machines HW-450

12_副本.jpg


Feature:
1. Closed Loop with inverter Control System to keep the stability and accuracy of speed managed.
Have a pair of the Assistant Device to hole the PCB smoothly entry by soft-press.
2. Modularization High efficiency pre-heater is convenience for maintenance, attained
powerful heat and long life.
3. Solder Pot in/out and up/down driven by motorized system with security device to avoid any damage cause of incorrect operating.
4. Window XP OS assorted with Intelligent electronics Design,Chinese/English Language on-screen
alternative available is most convenience to operating.
5. Standard full Titanium solder pot for Lead-free Production.1/2HP high power Mechanical pump to meet the wave as high as 15mm.
6. Spray Nozzle driving by Servo Motor will be Guided speeding and frequency
according to the PCB width;The nozzle is right angle according to rail always to ensure the flux can good penetrate the PCB through holes.
7. The adjustable Micro-Wind Circulation Design;With independent temperature control in 3 Preheating Zones that can insure to achieved the best heat-efficiency.
8. Quick plug and towline protection,more safe and reliable.
9. Compelling Cooling System to attain the great cold-down slope as per lead-free required;Conveyor angle can easily be adjusted by manual.


as HB provided: S = Standard, O = Option

Specifications

HW-350 / HW-450

HW-350-N / HW-450-N

Dimension: L x W x H(mm)

4430 x 1620 x 1710

4430 x 1620 x 1710

Weight

Approx. 2300KG

Approx. 2300KG

Power Supply

3P5W, 380/220V 50Hz 63A

3P5W, 380/220V 50/60Hz 63A

Start up Power (KW)

26KW

28KW

Operation Power Consumption

12KW

14KW

Control System

Computer +PLC

Spray System


Transmission Method

Step motor

Spray Pressure

0.25 Mpa ~0.4 Mpa

Flux flow

10~100 ml/min

Auto Fill Flux

Standard

Exhaust Methed

Up & down exhaust

Exhaust Ducting Diameter

Φ200 mm

Exhaust Capacity

25 m3/min

Preheating System

 

Preheating Mode

Hot-air (Option: IR heater at Top

Control Mode

PID + SSR

Preheating Zone Number

3

Preheating Length

1800 mm

Preheating Temp.

Room Temperature ~250℃

Warm-up Time

Approx. 15 min (Setting at 150℃)

Hot-air Blower

Standard

Transmission System

 

PCB Width (L x W)

Min.: 80 x 60 mm; Max.: 500 x 350/450 mm

Conveyor Direction

Standard: L→R; (Option: R→L)

Conveyor Speed

0~2000 mm/min

Conveyor Height

750 ±20mm

Component Clearance (mm) ★

Top 120 (Option: 160) / Bottom 15

Conveyor Speed Control Mode

Closed loop

Finger

Standard: Double-hook type

Conveyor Width Control Mode

Auto

Conveyor Angle

4°~7°

Soldering system

 

Solder Pot Material

STD: Full Titanium Pot

STD: Full Titanium Pot

Wave Height Adjust

PC + Digital Control By

Heater Power

380VAC 10/12KW

Solder Pot Temperature

300℃

Solder Pot Capacity

Pb-Free 450; Pb 550KG / Pb-Free 600; Pb 650KG

Wave DrivePower

1/2HP x 2, 3Phase 220VAC

Solder Pot Warm-up Timing

Approx. 180 min. (Setting at 250℃)

Temperature Control Mode

PID + SSR

Cooling System

 

Cooling Method

STD: Forced Air (Option: Air Chiller)

Other


Finger Cleaning System

Brush

Finger Lifting At Returning

Standard

Option


Centrer Support

Optional

Optional

J-Sonic Ultrasonic Spray

Optional

Optional

Top Heating

Optional

Optional

UPS Protection

Optional

Optional

Nitrogen Device

Optional

Optional

Feeder Knife

Optional

Optional


Inquiry