SMT Hot air Reflow Oven 12 zones
HB Automation Advantages
HB Automation provides SMT equipment including Reflow oven 12 zones model, We have made one of our customers' main production challenges as our own: guaranteeing the highest productivity at the lowest manufacturing cost.
• with thermal accuracy of ±1˚C,
• produces a ΔT of ±2°C across.
• Best in the industry warranty – 5 years for the heaters,
• More standard features than any other oven available in the market
Number of heating zones
Top 12+bottom 12
Length of heating zones(mm)
Number of cooling zones
Top 2 Forced air cooling
8 mm Aluminum alloy plates
10M2/min *2 channel exhaust
Power supply requirements
3 phase,380V 50/60Hz (optional: 3 phase,220V 50/60V)
Normal Power consumption
Temp. setting range
Room temperature to 300°C
Temperature control method
PID Close loop control +SSR Driving
Temperature control precision
+/- 1.0 °C
Temperature deviation on PCB
+/- 1.5°C ( by HB test standard )
Single buckle for preventing board jammed
Max. PCB width
400mm ( Optional 610mm )
Range of rail width
50mm -400mm (optional 50mm -610mm )
Top/Bottom clearance of PCB : 25mm
L to R ( Optional R to L )
PCB transmission method
Chain + Mesh
300mm /min-2000mm / min
Auto-lubrication + Manual-lubrication
Full N2 system, Center support system, KIC RPI reflow process inspection, Dual lane
• 12 zones model CS-1202
• Light tower
• Uninterruptible power supply
• Guaranteed Lead Free process ready
• 5 years for the heaters, blowers and solder pot - 2 on all other parts.
• UPS power supply equipped
• Dual lane conveyor with independent speed control( Optional)
• Center support, auto width control, Nitrogen system provided (optional)
Closed loop nitrogen control system (Option)
To maintain stable, user-selected oxygen PPM levels automatically. A wide range of PPM levels can be selected with nitrogen consumption rate as low as depending upon board size. An internal oxygen sensor and proportioning valve is used to minimize nitrogen consumption and related costs by up to 50% ! Use completely sealed design inside the chamber of oven to be effective protection for nitrogen, the nitrogen content of the minimum can be as low as 150 ppm. Under the circumstances of 300-800ppm oxygen, the consumption of nitrogen is lower than 18 m3/H.
Q: What is the main advantage of your wave solder machine?
A: Designed to reduce solder dross; High quality Ti-fingers for PCB and PCB with pallet; Best quality nitrogen system allows the PPM level down to 500PPM.
Q: Leaded and Lead-Free
A: Until a few years ago, every solder joint were made with Sn-Pb alloys and everyone where quite happy about it.
Then someone started to think about all the electronics discarded in the bin every day by billions of people and the consequent lead pollution.
This (and a few other reasons) brought to the concept of RoHS and lead-free electronic and the Sn-Pb was substituted with other alloys like Sn-Ag-Cu.
Today leaded solder is not allowed by laws of many countries, particularly in the European Union and, even if you live in a country where leaded solder medium are allowed, you should consider using lead-free solder paste.
Lead poisoning is something you should be concerned about, especially if you work in a home-lab.
When absorbed by your body, lead is a cumulative poison affecting your health in several nasty ways.
Lead poisoning is not easy to recognize and children are particularly vulnerable to lead, which impede their brain development.