10 zones Convection Reflow Oven
HB Automation Advantages
HB Automation is a comprehensive supplier in the SMT market to provide our customer with a wide range of the most innovative and reliable types of SMT equipment including Reflow oven with 10,12 zones model, with thermal accuracy of ±1˚C, produces a ΔT of ±2°C across. Best in the industry warranty – 5 years for the heaters, blowers and solder pot - 2 on all other parts. We have made one of our customers'main production challenges as our own: guaranteeing the highest productivity at the lowest manufacturing cost.
Number of heating zones
Top 10+ bottom 10
Length of heating zones (mm)
Number of cooling zones
Top 2 Forced air cooling
10M2/min *2 channel exhaust
Power supply requirements
3 phase, 380V 50/60Hz (optional: 3 phase, 220V 50/60V)
Normal Power consumption
Temp. setting range
Room temperature to 300°C
Temperature control method
PID Close loop control +SSR Driving
Temperature control precision
+/- 1.0 °C
Temperature deviation on PCB
+/- 1.5°C ( by HB test standard )
Single buckle for preventing board jammed
Max. PCB width
400mm ( Optional 610mm )
Range of rail width
50mm -400mm (optional 50mm -610mm )
Top/Bottom clearance of PCB : 25mm
L to R ( Optional R to L )
PCB transmission method
Chain + Mesh
300mm /min-2000mm / min
Auto-lubrication + Manual-lubrication
• 10 zones model CS-1002
• Flux collection system
• Windows 7. Operator interface
• Light tower
• Uninterruptible power supply
• Guaranteed Lead Free process ready
• 300ºC high temperature processing capabilities
• 5 years for the heaters, blowers and solder pot - 2 on all other parts.
Center support system for preventing the deformation of PCB board puzzle ( Optional）
The unique retractable center support system is easy to use with maximum flexibility. It can hide itself when not used and will not hit the components on double sided boards or boards with long components leads.
Q: What is your normal package?
A: Plywood crate and vacuum packing.
Q: Why HB Reflow Oven?
A: HB oven conversion is usually a much cheaper (and often better) alternative, but to be able to control the temperature to follow the suggested thermal profiles you are going to need a controller capable of compensating for the high thermal inertia usually related to cheap mass produced food ovens.
These toaster ovens also transmit heat mostly by radiation than convection and this is another factor to take into account when building a controller.
HB has been designed to follow any reflow profile, to be adaptable to any oven and to compensate for inertia and hysteresis.