Model NO.: ETA E10 reflow oven
HS Code: 8515190000
SMT lead-free hot air convection reflow oven
Model: ETA E10
Brief: E10 Lead free hot air reflow oven
> Eight groups of top and bottom forced hot air convection heating zones.
> Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.
> Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.
> Power consumption savings of 1/3 as compared to other systems.
> Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.
> Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.
> Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.
> Two (2) groups of forced air convection cooling zones.
Distortion-free Conveyor System with Automated Chain Lubrication
> Combined pin chain rail and mesh belt conveyor system (Note: Mesh belt is not available on machines with center board support. )
> Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.
> Automated chain lubrication system with a computer controlled central reservoir. Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance.
Fresh Air Recharge System
> Fresh air is supplied to each zone uniformly to provide a rapid process transfer.
Flux Management System
> Air amplifier forces supercharged flux collection and recirculation.
> Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.
> PC control system with windows based control software.
> Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.
> Motorized hood lift allows easy access to the inside of the oven for service and maintenance.
> Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.
> Swing arm control PC station
> Four (4) emergency stop switches
> Two (2) exhaust ports
> SMEMA interface
> System documentation
|Standard color||Computer grey|
|Number of heating zones||Up10/bottm10|
|Length of heating zones||3891mm|
|Number of cooling zones||2(built-in)|
|Exhaust volume||10M3/minx2 Exhausts|
|Standard feature of control system|
|Electric supply required||3phase, 380V 50/60Hz|
|Electric power required||80KW|
|Power for warm up||36KW|
|Heating pattern||Up& Bottom Hot air|
|Warming time||Approx. 30minute|
|Temp. setting range||Room temp__300degree|
|Control system||PLC+ Computer|
|Temperature control method||PID close loop control +SSR driving|
|Temperature control precision||± 1.0degree|
|Temperature deviation on PCB||± 1.5degree|
|Data storage||Process data and status storage (80GB)|
|Abnormal alarm||Abnormal temperature(extra-high/extra-low temp)|
|Board dropped alarm||Tower light: yellow warming: Green-normal: Red-abnormal|
|Standard features of conveyor system|
|Max. width of PCB||Max: 450mm(Standard)|
|Rail Number||1 Lane(standard)|
|Components clearance||Top/bottom clearance of PCB is 25mm|
|Conveyor height||Light → right(option: R→ L)|
|PCB transmission agent||Air-reflow=chain +mesh (Standard)|
|Conveyor height||900/± 20mm|
|Conveyor speed range||300~2000mm/min|